ZyXEL NBG-419N Guia Do Utilizador

Chapter 7 Router Mode

NBG-419N User’s Guide

- 802.11 Mode

This shows the wireless standard.

- WPS

This displays Configured when the WPS has been set up. 

This displays Unconfigured if the WPS has not been set up.

Click the status to display Network > Wireless LAN > WPS screen.

System Status
Item

This column shows the type of data the NBG-419N is recording.

Data

This column shows the actual data recorded by the NBG-419N.

System Up Time

This is the total time the NBG-419N has been on.

Current Date/Time

This field displays your NBG-419N’s present

 

date and time.

System Resource
- CPU Usage

This displays what percentage of the NBG-419N’s processing ability is 
currently used. When this percentage is close to 100%, the NBG-419N is 
running at full load, and the throughput is not going to improve anymore. 
If you want some applications to have more throughput, you should turn 
off other applications (for example, using bandwidth management.)

- Memory Usage

This shows what percentage of the heap memory the NBG-419N is using. 

System Setting
- Firewall

This shows whether the firewall is enabled or not.

- Bandwidth 

Management

This shows whether the bandwidth management is enabled or not.

- UPnP

This shows whether UPnP is enabled or not.

- Configuration Mode

This shows the web configurator mode you are viewing - Expert.

Interface Status

Interface

This displays the NBG-419N port types. The port types are: WAN, LAN 
and WLAN.

Status

For the LAN and WAN ports, this field displays Down (line is down) or Up 
(line is up or connected).

For the WLAN, it displays Up when the WLAN is enabled or Down when 
the WLAN is disabled.

Rate

For the LAN ports, this displays the port speed and duplex setting or N/A 
when the line is disconnected.

For the WAN port, it displays the port speed and duplex setting if you’re 
using Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to 
trigger a call) and Drop (dropping a call) if you're using PPPoE or PPTP 
encapsulation. This field displays N/A when the line is disconnected.

For the WLAN, it displays the maximum transmission rate when the WLAN 
is enabled and N/A when the WLAN is disabled.

Summary
BW MGMT Monitor 

Click Details... to go to the Monitor > 

BW MGMT Monitor screen 

Use this screen to view the amount of 

network bandwidth that applications running in the network are 

using.

Table 25   Status Screen: Router Mode