ZyXEL NBG-419N Guia Do Utilizador

Chapter 8 Access Point Mode

NBG-419N User’s Guide

Use the menu in the navigation panel to configure NBG-419N features in Access 
Point mode.

The following screen and table show the features you can configure in Access Point 
mode.

Figure 46   Menu: Access Point Mode 

Refer to 

 for descriptions of the labels shown in the 

Navigation panel.

Use this section to configure your LAN settings while in Access Point mode. 

Click Network > LAN to see the screen below.

Rate

For the LAN ports, this displays the port speed and duplex setting or N/A 
when the line is disconnected.

For the WAN port, it displays the port speed and duplex setting if you’re 
using Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to 
trigger a call) and Drop (dropping a call) if you're using PPPoE or PPTP 
encapsulation. This field displays N/A when the line is disconnected.

For the WLAN, it displays the maximum transmission rate when the WLAN 
is enabled and N/A when the WLAN is disabled.

Summary
Packet Statistics

Click Details... to go to the

 

Packet Statistics screen 

). Use this screen to view port status and packet 

specific statistics.

WLAN Station Status

Click Details... to go to the

 

WLAN Station Status screen 

). Use this screen to view the wireless stations 

that are currently associated to the NBG-419N.

Table 27   Status Screen: Access Point Mode