ZyXEL NBG-419N Guia Do Utilizador

Chapter 9 WISP Mode

NBG-419N User’s Guide

Use this screen to enable the power saving mode of your NBG-419N. Go to 
Configuration > Wireless LAN to open the following screen.

Figure 56   Configuration > Wireless LAN > Advance Screen (WISP)

The following table describes the labels in this screen. 

Table 34   Configuration > Wireless LAN > Advance Screen (WISP)

Power 
Saving Mode

Select CAM (Constantly Awake Mode) if you do not want your NBG-
419N to go to “sleep” when no wireless activity is detected in the Wireless 
LAN. 

Select Power Saving Mode if you want the NBG-419N to go to sleep 
when no wireless connection is needed for a period of time. This means 
the NBG-419N consumes less electrical power.

RTS 
Threshold

This is the maximum data fragment size that can be sent in a wireless 
network before the AP fragments the packet into smaller data frames.

Fragment 
Threshold

This value controls how often wireless clients must get permission to send 
information to the AP. The lower the value, the more often the wireless 
clients must get permission. If this value is greater than the fragmentation 
threshold value, then wireless clients never have to get permission to send 
information to the AP.

Apply

Click Apply to save your changes back to the NBG-419N.

Reset

Click Reset to reload the previous configuration for this screen.