ZyXEL p-2302hw-p1 Manual Do Utilizador

P-2302HW/HWL-P1 Series User’s Guide

Chapter 6 WAN

105

Use these screens to set up the ZyXEL Device on the WAN. 

You can configure the Internet connection, DNS servers, and how the ZyXEL Device sends 
routing information using RIP. In addition, you can set up a backup gateway in case the default 
gateway is not available.

The ZyXEL Device supports PPPoE (Point-to-Point Protocol over Ethernet). PPPoE is an 
IETF standard (RFC 2516) specifying how a personal computer (PC) interacts with a 
broadband modem (DSL, cable, wireless, etc.) connection. The PPP over Ethernet option is 
for a dial-up connection using PPPoE.

For the service provider, PPPoE offers an access and authentication method that works with 
existing access control systems (for example Radius). 

One of the benefits of PPPoE is the ability to let you access one of multiple network services, 
a function known as dynamic service selection. This enables the service provider to easily 
create and offer new IP services for individuals.

Operationally, PPPoE saves significant effort for both you and the ISP or carrier, as it requires 
no specific configuration of the broadband modem at the customer site.

By implementing PPPoE directly on the ZyXEL Device (rather than individual computers), 
the computers on the LAN do not need PPPoE software installed, since the ZyXEL Device 
does that part of the task. Furthermore, with NAT, all of the LANs’ computers will have 
access.