ZyXEL p-2302hw-p1 Manual Do Utilizador

P-2302HW/HWL-P1 Series User’s Guide

Chapter 7 LAN

127

Use this screen to add subnets on the LAN port. You can also control what routing information 
is sent and received by each subnet. To access this screen, click Network > LAN > 
Advanced.

RIP Direction

Use this field to control how much routing information the ZyXEL Device sends and 
receives on the subnet.

None - The ZyXEL Device does not send or receive routing information on the 
subnet.

Both - The ZyXEL Device sends and receives routing information on the subnet.

In Only - The ZyXEL Device only receives routing information on the subnet.

Out Only - The ZyXEL Device only sends routing information on the subnet.

RIP Version

Select which version of RIP the ZyXEL Device uses when it sends or receives 
information on the subnet.

RIP-1 - The ZyXEL Device uses RIPv1 to exchange routing information.

RIP-2B - The ZyXEL Device broadcasts RIPv2 to exchange routing information.

RIP-2M - The ZyXEL Device multicasts RIPv2 to exchange routing information.

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Cancel

Click this to set every field in this screen to its last-saved value.

Table 52   Network > LAN > IP Alias