ZyXEL p-2302hw-p1 Manual Do Utilizador

P-2302HW/HWL-P1 Series User’s Guide

Chapter 13 VoIP Trunking

177

Each field is described in the following table.

Use this screen to set up outgoing authentication accounts for forwarding calls through peer 
devices and incoming authentication accounts for forwarding calls from peer devices. To 
access this screen, click 

.

Enable Trunking

Select this to turn on VoIP trunking on your ZyXEL Device.

Auto Attendant 
Timeout(sec)

This is the setting which determines how long the ZyXEL Device waits for a caller 
to enter a phone number when it receives the call. Enter the number of seconds 
before the Auto Attendant times out. The default value is 10 seconds and entering 
0 does not change the default. Enter a value from 1 to 255 seconds. 

When the auto attendant times out, the phone directly connected to the ZyXEL 
Device rings.

Dialing 
Interval(sec)

Enter the number of seconds the ZyXEL Device should wait after you stop dialing 
numbers before it makes the phone call. The value depends on how quickly you 
dial phone numbers. The default value is 3 seconds and entering 0 does not 
change the default. Enter a value from 1 to 255 seconds.

Enable Auto 
Attendant 
Authentication

Select this to enable authentication for calls coming into your ZyXEL Device. This 
is similar to enabling a PIN (Personal Identification Number) that callers must enter 
to forward calls via your ZyXEL Device.

Password

This is the PIN callers have to enter via their phone pad when dialing into your 
ZyXEL Device to forward calls through it. Enter a number between 1 and 32 digits 
long.

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Cancel

Click this to reset the fields.