ZyXEL p-2302hw-p1 Manual Do Utilizador
P-2302HW/HWL-P1 Series User’s Guide
Chapter 17 Bandwidth MGMT
215
17.2.3 Bandwidth Class Edit Screen
Use this screen to configure a bandwidth management class.
Note: For each interface, you must enable bandwidth management before you can
configure classes.
To access this screen, click Add Sub-Class in Management > Bandwidth MGMT > Class
Setup.
Setup.
Figure 116 Management > Bandwidth MGMT > Class Setup > Edit
See
for examples of services for which you might create bandwidth
classes. Each field is described in the following table.
Table 93 Management > Bandwidth MGMT > Class Setup > Edit
LABEL
DESCRIPTION
This section lets you set the budget and priority for this class.
Class Name
Finish the auto-generated name, or enter a descriptive name up to 20
alphanumeric characters long. Spaces are allowed.
alphanumeric characters long. Spaces are allowed.
Bandwidth Budget Enter the maximum bandwidth for the class, in kbps. The recommendation is 20 -
20000 kbps for each class.
Priority
Enter the priority of this class. The higher the number, the higher the priority. Legal
values are 0 - 7. The default setting is 3.
values are 0 - 7. The default setting is 3.