ZyXEL p-2302hw-p1 Manual Do Utilizador

P-2302HW/HWL-P1 Series User’s Guide

Chapter 18 Remote MGMT

219

Use these screens to control which computers can use which services to access the ZyXEL 
Device on each interface.

Remote management allows you to determine which services/protocols can access which 
ZyXEL Device interface (if any) from which computers.

You may manage your ZyXEL Device from a remote location via:

To disable remote management of a service, select Disable in the corresponding Server 
Access field.

You may only have one remote management session running at a time. The ZyXEL Device 
automatically disconnects a remote management session of lower priority when another 
remote management session of higher priority starts. The priorities for the different types of 
remote management sessions are as follows.

1 Telnet

2 HTTP

Remote management over LAN or WAN will not work when: 

1 You have disabled that service in one of the remote management screens.

2 The IP address in the Secured Client IP field does not match the client IP address. If it 

does not match, the ZyXEL Device will disconnect the session immediately.

3 There is already another remote management session with an equal or higher priority 

running. You may only have one remote management session running at one time.

When NAT is enabled:

•

Internet (WAN only)

•

ALL (LAN and WAN)

•

LAN only

•

Neither (Disable).