ZyXEL p-2302hw-p1 Manual Do Utilizador

P-2302HW/HWL-P1 Series User’s Guide

256

Chapter 21 Logs

The following tables provide descriptions of example log messages.

 

Table 110   System Error Logs

WAN connection is down.

The WAN connection is down. You cannot access the network 
through this interface.

%s exceeds the max. 

number of session per 

host!

This attempt to create a NAT session exceeds the maximum 
number of NAT session table entries allowed to be created per 
host.

Table 111   System Maintenance Logs

Time synchronization is 

successful

The device has adjusted its time based on information from 
the time server.

Time synchronization failed

The device failed to get information from the time server.

WAN interface gets IP: %s

The WAN interface got a new IP address from the DHCP or  
PPPoE server.

DHCP client IP expired

A DHCP client's IP address has expired.

DHCP server assigns %s

The DHCP server assigned an IP address to a client.

Successful WEB login

Someone has logged on to the device's web configurator 
interface.

WEB login failed

Someone has failed to log on to the device's web configurator 
interface.

Successful TELNET login

Someone has logged on to the router via telnet.

TELNET login failed

Someone has failed to log on to the router via telnet.

Successful FTP login

Someone has logged on to the device via ftp.

FTP login failed

Someone has failed to log on to the device via ftp.

NAT Session Table is Full!

The maximum number of NAT session table entries has been 
exceeded and the table is full.

Time initialized by Datetime 

server: %s

The device got the time and date from the Datetime server.

Time initialized by Time 

server

The device got the time and date from the time server.

Time initialized by NTP 

server

The device got the time and date from the NTP server.

Failed to sync with Daytime 

server: %s

The device was not able to connect to the Daytime server.

Failed to sync with Time 

server: %s

The device was not able to connect to the Time server.

Failed to sync with NTP 

server: %s

The device was not able to connect to the NTP server.