ZyXEL p-2302hw-p1 Manual Do Utilizador

P-2302HW/HWL-P1 Series User’s Guide

Chapter 2 Introducing the Web Configurator

47

The icons provide the following functions.

Use the menu items on the navigation panel to open screens to configure ZyXEL Device 
features. The following tables describe each menu item.

Table 2   Web Configurator Icons in the Title Bar

Wizards: Click this icon to open one of the web configurator wizards. See 

 for more information.

Logout: Click this icon to log out of the web configurator.

Table 3   Navigation Panel Summary

Status

This screen contains administrative and system-related information.

Network

Wireless LAN

General

Use this screen to configure the wireless LAN settings and WLAN 
authentication/security settings.

OTIST

Use this screen to assign your wireless security settings to wireless clients.

MAC Filter

Use this screen to configure the ZyXEL Device to give exclusive access to 
specific wireless clients or exclude specific wireless clients from accessing 
the ZyXEL Device. 

Advanced

Use this screen to configure wireless features such as the transmission 
mode.

WAN

Internet 
Connection

Use this screen to set up ISP parameters, IP addresses, and MAC 
addresses.

Advanced

Use this screen to set up DNS, RIP, multicasting, and Windows Networking 
for your WAN port.

Traffic Redirect

Use this screen to specify up a backup gateway in case the main one is not 
available.

LAN

IP

Use this screen to set up your LAN’s IP address and subnet mask.

DHCP Setup

Use this screen to configure the ZyXEL Device’s DHCP server and DNS 
server settings.

Static DHCP

Use this screen to assign static IP addresses to MAC addresses.

Client List

Use this screen to look at which network clients are using the DHCP server.

IP Alias

Use this screen to partition your LAN interface into subnets.

Advanced

Use this screen to set up RIP, multicasting, Any IP, and Windows 
Networking for your LAN port.

NAT

General

Use this screen to enable and disable NAT features.

Port Forwarding

Use this screen to forward traffic to specific IP addresses based on the 
destination port.

Trigger Port

Use this screen to change your ZyXEL Device’s trigger port settings.

ALG

Use this screen to enable and disable the ZyXEL Device’s ALG.