ZyXEL p-2302hw-p1 Manual Do Utilizador

P-2302HW/HWL-P1 Series User’s Guide

Chapter 3 Wizard Setup

63

Note: You cannot use the 

 if the PPPoE remote server cannot be 

discovered automatically.

First DNS Server

Second DNS 
Server

Third DNS Server

Select From ISP if your ISP dynamically assigns DNS server information. (In this 
case, the ISP assigns the WAN IP address too. See Network > WAN > Internet 
Connection.) The field to the right is read-only, and it displays the IP address 
provided by your ISP.

Select User-Defined if you have the IP address of a DNS server. You might get it 
from your ISP or from your network. Enter the IP address in the field to the right.

Select None if you do not want to use this DNS server. If you select None for all of 
the DNS servers, you must use IP addresses to configure the ZyXEL Device and to 
access the Internet.

< Back

Click this to go to the previous screen.

Next >

Click this to go to the next screen.

Exit

Click this to close this screen and return to the main screen.

Table 14   Connection Wizard > IP Address (Ethernet)