ZyXEL p-2302hw-p1 Manual Do Utilizador

P-2302HW/HWL-P1 Series User’s Guide

Chapter 4 Status Screens

87

Figure 37   Packet Statistics Window

Each field is described in the following table.

Table 31   Packet Statistics Window

Port

This field displays each port in the ZyXEL Device.

Status

If the port is not connected to anything, this field displays Down.

If the interface uses Ethernet encapsulation, this field displays the port speed and 
the Ethernet duplex setting. Duplex settings are:

Full - The ZyXEL Device is using full-duplex Ethernet.

Half - The ZyXEL Device is using half-duplex Ethernet.

You cannot change the Ethernet duplex setting in the ZyXEL Device.

If this interface uses PPPoE encapsulation, this field displays the port speed and 
the status of the call.

Down - The connection is not available.

Dial - The ZyXEL Device is making the call.

Idle - The call is connected.

Drop - The ZyXEL Device is ending the call.

The LAN interface always uses Ethernet encapsulation. You can change the 
encapsulation of the WAN interface in Network > WAN > Internet Connection.

Tx Pkts

This field displays the number of packets the ZyXEL Device has transmitted from 
the port.

Rx Pkts

This field displays the number of packets the ZyXEL Device has received from the 
port.

Collisions

This field displays the number of collisions detected by the port.

Tx B/s

This field displays how quickly the ZyXEL Device has transmitted packets from the 
port. The rate is the number of bytes transmitted one second before the last time 
the screen updated (refreshed).

Rx B/s

This field displays how quickly the ZyXEL Device has received packets from the 
port. The rate is the number of bytes received one second before the last time the 
screen updated (refreshed).

Up Time

This is the total amount of time the port has been connected.