ZyXEL p-2302hw-p1 Manual Do Utilizador

P-2302HW/HWL-P1 Series Quick Start Guide

3

5 POWER: Use the power adaptor provided with your P-2302HW/HWL-P1 to connect an appropriate power 

source to this socket.

• The POWER light blinks during start-up and is green once the P-2302HWL-P1 is ready.
• Each ETHERNET light turns on if the corresponding ETHERNET port is properly connected. 

The lights blink when the P-2302HWL-P1 is sending or receiving data through the correspond-
ing ETHERNET port.

• The WAN light stays on if a physical connection with your DSL modem exists. The INTERNET 

light stays on when Internet access is available.

• The PHONE lights stay on when your SIP account is registered and they blink if the receiver is 

off the hook.

• The WLAN light turns on when the wireless LAN is ready. It blinks when the P-2302HWL-P1 is 

sending/receiving data through the wireless LAN. 

If none of the LEDs are on, turn the device off and 
recheck your hardware connections.

1 Open your browser, and go to 

http://192.168.1.1

.

2 Enter the password 1234. Then, click Login.