ZyXEL nbg-334w Guia Do Utilizador

Chapter 2 Introducing the Web Configurator

NBG334W User’s Guide

This screen displays the IP address of each computer that is using the NBG334W via the any 
IP feature. Any IP allows computers to access the Internet through the NBG334W without 
changing their network settings when NAT is enabled. To access this screen, open the Status 
screen (see 

), and click (Details...) next to Any IP Table.

Figure 6   Any IP Table 

Select the BW MGMT Monitor (Details...) hyperlink in Status screen. View the bandwidth 
usage of the WAN configured bandwidth rules. This is also shown as bandwidth usage over 
the bandwidth budget for each rule. The gray section of the bar represents the percentage of 
unused bandwidth and the blue color represents the percentage of bandwidth in use.

Figure 7   Summary: BW MGMT Monitor

Logs

View Log

Use this screen to view the logs for the categories that you 

selected.

Log Settings

Use this screen to change your NBG334W’s log settings.

Tools

Firmware

Use this screen to upload firmware to your NBG334W.

Configuration Use this screen to backup and restore the configuration or reset 

the factory defaults to your NBG334W. 

Restart

This screen allows you to reboot the NBG334W without turning the 

power off.

Config Mode

General

This screen allows you to display or hide the advanced screens or 

features.

Sys OP 

Mode

General

This screen allows you to select whether your device acts as a 

Router or a Access Point.

Table 5   Screens Summary