ZyXEL nbg-334w Guia Do Utilizador

Chapter 5 Wireless LAN

NBG334W User’s Guide

The QoS screen allows you to automatically give a service (such as e-mail, VoIP or FTP) a 
priority level.
Click Network > Wireless LAN > QoS. The following screen appears.

Enable Intra-

BSS Traffic

A Basic Service Set (BSS) exists when all communications between wireless clients 

or between a wireless client and a wired network client go through one access point 

(AP). 
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is 

enabled, wireless client A and B can access the wired network and communicate 

with each other. When Intra-BSS is disabled, wireless client A and B can still access 

the wired network but cannot communicate with each other.

Output Power 

Set the output power of the NBG334W in this field. If there is a high density of APs 

within an area, decrease the output power of the NBG334W to reduce interference 

with other APs.

802.11 Mode

Select 802.11b to allow only IEEE 802.11b compliant WLAN devices to associate 

with the NBG334W.
Select 802.11g to allow only IEEE 802.11g compliant WLAN devices to associate 

with the NBG334W.
Select 802.11b/g to allow either IEEE802.11b or IEEE802.11g compliant WLAN 

devices to associate with the NBG334W. The transmission rate of your NBG334W 

might be reduced. 

Apply

Click Apply to save your changes back to the NBG334W.

Reset

Click Reset to reload the previous configuration for this screen.

Table 33   Network > Wireless LAN > Advanced