ZyXEL p-2608hwl-d1 Manual Do Utilizador

P-2608HWL-Dx Quick Start Guide

6

ZyXEL's One-Touch Intelligent Security Technology (OTIST) feature allows you to automatically configure the 
SSID and WPA-PSK on all OTIST-equipped wireless clients within range of the P-2608HWL-Dx. Note

• If you enable OTIST but select Disable wireless security using the wireless wizard, the P-2608HWL-Dx will 

create a WPA-PSK automatically.

• If you enable OTIST and select Manually assign a WEP key using the wireless wizard, the P-2608HWL-Dx 

will replace the WEP key with a WPA-PSK.

• Enable OTIST only if your wireless clients support WPA and OTIST.

You must enable OTIST on the P-2608HWL-Dx and all wireless clients within three minutes in any order. 

To start OTIST on the P-2608HWL-Dx, hold in the RESET button for three to five seconds. Do not hold the 
RESET button in for too long, as this will reset the P-2608HWL-Dx to the factory defaults. 

To enable OTIST on wireless clients, click Start in the Adapter screen. The Setup Key is 01234567 by default. 
If you have previously saved a setup key on the P-2608HWL-Dx, use it instead of the default. 

For more information, see Wireless LAN in the User's Guide.

Follow the rest of the directions to set up your wireless network. When you are done, click Return to Wizard 
Main Page.

1 Click VOICE OVER INTERNET SETUP. You 

should have the information provided by your VoIP 
service provider.