ZyXEL NBG-416N Guia Do Utilizador

Chapter 3 The Web Configurator

NBG-416N User’s Guide

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows 
individual clients to obtain TCP/IP configuration at start-up from a server. You can 
configure the NBG-416N’s LAN as a DHCP server or disable it. When configured as 
a server, the NBG-416N provides the TCP/IP configuration for the clients. If DHCP 
service is disabled, you must have another DHCP server on that network, or else 
the computer must be manually configured.

Click the DHCP Table (Details...) hyperlink in the Status screen. Read-only 
information here relates to your DHCP status. The DHCP table shows current 
DHCP client information (including IP Address, Host Name and MAC Address) 
of all network clients using the NBG-416N’s DHCP server.

Figure 7   Summary: DHCP Table

The following table describes the labels in this screen.

Tools

Firmware

Use this screen to upload firmware to your NBG-416N.

Configuration Use this screen to backup and restore the configuration or 

reset the factory defaults to your NBG-416N. 

Restart

This screen allows you to reboot the NBG-416N without 
turning the power off.

Sys OP 

Mode

General

This screen allows you to select whether your device acts 
as a Router or a Access Point.

Language

Language

This screen allows you to select the language you prefer.

Table 4   Screens Summary (continued)

Table 5   Summary: DHCP Table

# 

This is the index number of the host computer.

IP Address

This field displays the IP address relative to the # field listed above.

Host Name 

This field displays the computer host name.