ZyXEL p-2802h-i1 Guia Do Utilizador

 Chapter 10 Voice

P-2802H(W)(L)-I Series User’s Guide

Use this screen to edit advanced settings for each phone port. To access this screen, click 
Advanced Setup in VoIP > Phone > Analog Phone.

Figure 79   Phone > Analog Phone > Advanced

Each field is described in the following table.

PSTN Line (“L” 

models only)

Select this if you want to receive phone calls from the PSTN line (that do not use 

the Internet) on this phone port. If you select more than one source for incoming 

calls, there is no way to distinguish between them when you receive phone calls.

Note: When the ZyXEL Device does not have power, regardless of 

the settings you configure, the phone(s) connected to the 
PHONE port(s) can still be used for making PSTN calls. Only 
one phone can be in use at a time. 

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Cancel

Click this to set every field in this screen to its last-saved value.

Advanced Setup

Click this to edit the advanced settings for this phone port. The Advanced Analog 

Phone Setup screen appears.

Table 51   Phone > Analog Phone

Table 52   Phone > Analog Phone > Advanced

Analog Phone

This field displays the analog phone port you see in this screen.

Voice Volume 

Control

Speaking Volume

Enter the loudness that the ZyXEL Device uses for speech that it sends to the 

peer device. 
-1 is the quietest, and 1 is the loudest.