ZyXEL p-2802h-i1 Guia Do Utilizador

Chapter 16 Static Route

P-2802H(W)(L)-I Series User’s Guide

Figure 134   Static Route

The following table describes the labels in this screen. 

Select a static route index number and click Edit. The screen shown next appears. Use this 
screen to configure the required information for a static route.

Table 96   Static Route

#

This is the number of an individual static route.

Active

This field indicates whether the rule is active or not.
Clear the check box to disable the rule. Select the check box to enable it.

Name

This is the name that describes or identifies this route. 

Destination

This parameter specifies the IP network address of the final destination. Routing is 

always based on network number. 

Netmask

This parameter specifies the IP network subnet mask of the final destination.

Gateway

This is the IP address of the gateway. The gateway is a router or switch on the same 

network segment as the device's LAN or WAN port. The gateway helps forward 

packets to their destinations.

Modify

Click the Edit icon to go to the screen where you can set up a static route on the 

ZyXEL Device.
Click the Remove icon to remove a static route from the ZyXEL Device. A window 

displays asking you to confirm that you want to delete the route. 

Apply

Click this to apply your changes to the ZyXEL Device.

Cancel

Click this to return to the previously saved configuration.