ZyXEL p-2802h-i1 Guia Do Utilizador

Chapter 17 Quality of Service (QoS)

P-2802H(W)(L)-I Series User’s Guide

In the following figure, your Internet connection has an upstream transmission speed of 50 
Mbps. You configure a classifier to assign the highest priority queue (6) to VoIP traffic from 
the LAN interface, so that voice traffic would not get delayed when there is network 
congestion. Traffic from the boss’s IP address (192.168.1.23 for example) is mapped to queue 
5. Taffic that does not match these two classes are assigned priority queue based on the 
internal QoS mapping table on the ZyXEL Device.

Figure 139   QoS Example

Figure 140   QoS Class Example: VoIP -1

Ethernet Priority

Select this option and select a priority level (between 0 and 7) from the drop 

down list box.
"0" is the lowest priority level and "7" is the highest.

VLAN ID

Select this option and specify a VLAN ID number between 2 and 4094. 

Back

Click Back to go to the previous screen.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Cancel

Click Cancel to begin configuring this screen afresh.

Table 102   QoS Class Configuration (continued)

Internet

50 Mbps

VDSL

VoIP: Queue 6

Boss: Queue 5
IP=192.168.1.23