ZyXEL nbg-5715 Guia Do Utilizador
Chapter 14 NAT
NBG5715 User’s Guide
107
for port numbers commonly used for particular services.
Figure 63
Network > NAT > Port Forwarding
The following table describes the labels in this screen.
Table 45
Network > NAT > Port Forwarding
LABEL
DESCRIPTION
Default Server Setup
Default Server
In addition to the servers for specified services, NAT supports a default server. A
default server receives packets from ports that are not specified in the Port
Forwarding screen. You can decide whether you want to use the default server
or specify a server manually.
default server receives packets from ports that are not specified in the Port
Forwarding screen. You can decide whether you want to use the default server
or specify a server manually.
Select this to use the default server.
Change to Server
Select this and manually enter the server’s IP address.
Port Forwarding
Service Name
Select a pre-defined service from the drop-down list box. The pre-defined
service port number(s) and protocol will be displayed in the Port Forwarding
Summary section.
service port number(s) and protocol will be displayed in the Port Forwarding
Summary section.
Otherwise, select User define to manually enter the port number(s) and select
the IP protocol.
the IP protocol.
Service Protocol
Select the transport layer protocol supported by this virtual server. Choices are
TCP, UDP, or TCP&UDP.
TCP, UDP, or TCP&UDP.
If you have chosen a pre-defined service in the Service Name field, the protocol
will be configured automatically.
will be configured automatically.
Server IP Address Enter the inside IP address of the virtual server here and click Add to add it in
the Port Forwarding Summary section.
Port Forwarding Summary
#
This is the number of an individual port forwarding server entry.
Status
This icon is turned on when the rule is enabled.
Name
This field displays a name to identify this rule.
Protocol
This is the transport layer protocol used for the service.
Port
This field displays the port number(s).
Server IP Address This field displays the inside IP address of the server.
Modify
Click the Edit icon to open the edit screen where you can modify an existing
rule.
rule.
Click the Remove icon to delete a rule.