ZyXEL nbg-5715 Guia Do Utilizador
Chapter 16 Static Route
NBG5715 User’s Guide
116
The following table describes the labels in this screen.
16.2.1 Add/Edit Static Route
Click the Add Static Route button or a rule’s Edit icon in the Static Route screen. Use this screen
to configure the required information for a static route.
to configure the required information for a static route.
Figure 71
Static Route: Add/Edit
The following table describes the labels in this screen.
Table 49
Network > Static Route
LABEL
DESCRIPTION
Add Static
Route
Route
Click this to create a new rule.
#
This is the number of an individual static route.
Status
This field indicates whether the rule is active (yellow bulb) or not (gray bulb).
Name
This field displays a name to identify this rule.
Destination
This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
always based on network number.
Subent Mask
This parameter specifies the IP network subnet mask of the final destination.
Gateway
This is the IP address of the gateway. The gateway is a router or switch on the
same network segment as the device's LAN or WAN port. The gateway helps
forward packets to their destinations.
same network segment as the device's LAN or WAN port. The gateway helps
forward packets to their destinations.
Modify
Click the Edit icon to open a screen where you can modify an existing rule.
Click the Remove icon to delete a rule from the NBG5715.
Apply
Click Apply to save your changes back to the NBG5715.
Cancel
Click Cancel to begin configuring this screen afresh.
Table 50
Static Route: Add/Edit
LABEL
DESCRIPTION
Static Route
Select to enable or disable this rule.
Route Name
Type a name to identify this rule. You can use up to 20 printable English keyboard
characters, including spaces.
characters, including spaces.
Destination IP
Address
Address
This parameter specifies the IP network address of the final destination. Routing
is always based on network number. If you need to specify a route to a single
host, use a subnet mask of 255.255.255.255 in the subnet mask field to force the
network number to be identical to the host ID.
is always based on network number. If you need to specify a route to a single
host, use a subnet mask of 255.255.255.255 in the subnet mask field to force the
network number to be identical to the host ID.
IP Subnet Mask Enter the IP subnet mask here.
Gateway IP
Address
Address
Enter the IP address of the next-hop gateway. The gateway is a router or switch
on the same segment as your NBG5715's interface(s). The gateway helps forward
packets to their destinations.
on the same segment as your NBG5715's interface(s). The gateway helps forward
packets to their destinations.