ZyXEL nbg-5715 Guia Do Utilizador
Chapter 20 Remote Management
NBG5715 User’s Guide
153
• Use the NBG5715’s WAN IP address when configuring from the WAN.
• Use the NBG5715’s LAN IP address when configuring from the LAN.
• Use the NBG5715’s LAN IP address when configuring from the LAN.
20.3.2 System Timeout
There is a default system management idle timeout of five minutes (three hundred seconds). The
NBG5715 automatically logs you out if the management session remains idle for longer than this
timeout period. The management session does not time out when a statistics screen is polling. You
can change the timeout period in the System screen
NBG5715 automatically logs you out if the management session remains idle for longer than this
timeout period. The management session does not time out when a statistics screen is polling. You
can change the timeout period in the System screen
20.4 WWW Screen
To change your NBG5715’s remote management settings, click Management > Remote MGMT to
open the WWW screen.
open the WWW screen.
Figure 90
Management > Remote MGMT > WWW
The following table describes the labels in this screen.
Table 65
Management > Remote MGMT > WWW
LABEL
DESCRIPTION
Port
You may change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
you must use the same port number in order to use that service for
remote management.
Access Status
Select the interface(s) through which a computer may access the
NBG5715 using this service.
NBG5715 using this service.
Secured Client IP
Address
Address
Select All to allow all computes to access the NBG5715.
Otherwise, check Selected and specify the IP address of the computer
that can access the NBG5715.
that can access the NBG5715.
Apply
Click Apply to save your customized settings and exit this screen.
Cancel
Click Cancel to begin configuring this screen afresh.