ZyXEL nbg-5715 Guia Do Utilizador

Chapter 5 Monitor and Summary

NBG5715 User’s Guide

Click Monitor > Packet Statistics or the Packet Statistics (Details...) hyperlink in the Status 
screen. Read-only information here includes port status, packet specific statistics and the "system 
up time". The Poll Interval(s) field is configurable and is used for refreshing the screen.

Summary: Packet Statistics 

The following table describes the labels in this screen.

Summary: Packet Statistics

Port

This is the NBG5715’s port type.

Status 

For the LAN ports, this displays the port speed and duplex setting or Down 
when the line is disconnected.

For the WAN port, it displays the port speed and duplex setting if you’re using 
Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a 
call) and Drop (dropping a call) if you're using PPPoE or PPTP encapsulation. 
This field displays Down when the line is disconnected.

For the WLAN, it displays the maximum transmission rate when the WLAN is 
enabled and Down when the WLAN is disabled.

TxPkts 

This is the number of transmitted packets on this port.

RxPkts 

This is the number of received packets on this port.

Collisions 

This is the number of collisions on this port.

Tx B/s 

This displays the transmission speed in bytes per second on this port.

Rx B/s

This displays the reception speed in bytes per second on this port.

Up Time

This is the total time the NBG5715 has been for each session.

System Up Time

This is the total time the NBG5715 has been on.

Poll Interval(s)

Enter the time interval in seconds for refreshing statistics in this field.

Set Interval

Click this button to apply the new poll interval you entered in the Poll 
Interval(s) field.

Stop

Click Stop to stop refreshing statistics.