ZyXEL nbg-5715 Guia Do Utilizador
Chapter 10 WAN
NBG5715 User’s Guide
77
10.5 The Advanced Screen
To change your NBG5715’s advanced WAN settings, click Network > WAN > Advanced. The
screen appears as shown. You can use this screen to enable multicast.
screen appears as shown. You can use this screen to enable multicast.
Figure 40
Network > WAN > Advanced
Table 25
Network > WAN > Advance
LABEL
DESCRIPTION
Multicast Setup
Select IGMPv1/v2 to enable multicasting. This applies to traffic routed
from the WAN to the LAN.
from the WAN to the LAN.
Select None to disable this feature. This may cause incoming traffic to be
dropped or sent to all connected network devices.
dropped or sent to all connected network devices.
Apply
Click Apply to save your changes back to the NBG5715.
Cancel
Click Cancel to begin configuring this screen afresh.