ZyXEL nbg-5715 Guia Do Utilizador
Chapter 12 LAN
NBG5715 User’s Guide
97
12.4 The LAN IP Screen
Use this screen to change the IP address for your NBG5715. Click Network > LAN > IP.
Figure 55
Network > LAN > IP
The following table describes the labels in this screen.
12.5 The IP Alias Screen
IP alias allows you to partition a physical network into different logical networks over the same
Ethernet interface. The NBG5715 supports three logical LAN interfaces via its single physical
Ethernet interface with the NBG5715 itself as the gateway for each LAN network.
Ethernet interface. The NBG5715 supports three logical LAN interfaces via its single physical
Ethernet interface with the NBG5715 itself as the gateway for each LAN network.
To change your NBG5715’s IP alias settings, click Network > LAN > IP Alias. The screen appears
as shown.
as shown.
Figure 56
Network > LAN > IP Alias
Table 38
Network > LAN > IP
LABEL
DESCRIPTION
IP Address
Type the IP address of your NBG5715 in dotted decimal notation.
IP Subnet Mask
The subnet mask specifies the network number portion of an IP address. Your
NBG5715 will automatically calculate the subnet mask based on the IP address
that you assign. Unless you are implementing subnetting, use the subnet mask
computed by the NBG5715.
NBG5715 will automatically calculate the subnet mask based on the IP address
that you assign. Unless you are implementing subnetting, use the subnet mask
computed by the NBG5715.
Apply
Click Apply to save your changes back to the NBG5715.
Cancel
Click Cancel to begin configuring this screen afresh.