ZyXEL p-660hwp Manual Do Utilizador

P-660HWP-Dx Quick Start Guide

10

section and enter it in the IP Address field. If not, select Obtain an IP Address 
Automatically. Click Apply and run the Internet/Wireless Setup wizard again r

V

If you have a DSL connection and have entered your ISP settings, but you 
cannot access the Internet, follow these steps.

1  Check you have correctly entered the information your ISP gave you. 
2 If you are using Bridge mode (check Mode in the Network > WAN > Internet 

Connection screen) click NAT > General and ensure Active Network Address 
Translation (NAT) is not selected. Click LAN > DHCP Setup and ensure that DHCP is 
set to None. Your ISP gives your computer an IP address directly. If you want to 
access the P-660HWP-Dx again, you need to use a static IP address in the same 
subnet as your P-660HWP-Dx (the P-660HWP-Dx’s default IP LAN address is http://
192.168.1.1). 

3 Click the wizard icon ( 

 ). Run the Internet/Wireless Setup wizard again. 

4 Contact your Internet Service Provider to check the status of your account.
5 If you still have problems, see Troubleshooting in the User’s Guide.

V

If you cannot access the Internet using the wireless network, do the 
following.

On a computer connected to the P-660HWP-Dx, make sure your P-660HWP-Dx and the 
computers on your wireless network are using the same SSID, channel and wireless 
security settings. See the chapter on Wireless LAN in the User’s Guide for more 
information.