ZyXEL p-660hwp Manual Do Utilizador

P-660HWP-Dx Quick Start Guide

2

1 DSL: Use the gray telephone wire to connect your P-660HWP-Dx’s DSL port to a 

telephone jack (or to the modem port on a splitter if you are using one). 

2 ETHERNET: Use the yellow Ethernet cable to connect a computer to an ETHERNET 

port on the P-660HWP-Dx for initial configuration and/or Internet access.

3 POWER: Use only the power cable that came in the package to connect your P-

660HWP-Dx to a power outlet. Make sure the power outlet is switched on. This socket 
will also act as your HomePlug AV connection.

4 Push in the POWER button. 
5 Look at the lights on the front panel.

• The POWER light (LED) blinks while your P-660HWP-Dx starts up and stays on once it is 

ready.

• The ETHERNET, WLAN, DSL, INTERNET and POWERLINE LEDs turn on if the corre-

sponding connections are properly made.

V

Check your connections if an LED does not turn on. Then turn the P-
660HWP-Dx off, wait for a few seconds and turn it back on. See 
Troubleshooting. If the problem remains, contact your local vendor.

Use this section to have your P-660HWP-Dx automatically detect and set up your Internet 
connection.