ZyXEL p-660hwp Manual Do Utilizador

P-660HWP-Dx Quick Start Guide 

7

5 Click Finish to complete and save the wizard setup. Your Internet connection is ready for 

you to use. Open a browser such as Internet Explorer and navigate to a website.

To set up a wireless network you need at least one wireless network card/adapter. 

• If you have a desktop computer, use either a wireless USB adapter or a wireless PCI 

adapter.

• If you have a laptop, use either a wireless USB adapter or a wireless CardBus card. These 

are built into many laptops.

To add a computer to your network you need to configure your wireless-enabled computer 
with the same SSID, channel and security settings as the P-660HWP-Dx. 

Alternatively, use OTIST, ZyXEL's One-Touch Intelligent Security Technology (OTIST) 
feature. It allows you to automatically configure the SSID and WPA-PSK on all OTIST-
equipped wireless clients within range of the P-660HWP-Dx. See the Wireless LAN 
chapter in the Users’ Guide for more information on OTIST.

Follow these steps to set up your HomePlug AV network on standard electrical wiring with 
a new password.

1 Plug your P-660HWP-Dx and other HomePlug AV devices into power outlets and turn 

them on. Your P-660HWP-Dx will try to detect other HomePlug AV devices on the 
same electrical wiring.

2 Check the POWERLINE (

) LED for a HomePlug AV connection.

• If the LED does not display, your device has a problem detecting another HomePlug AV 

device. Go to Troubleshooting for more information. 

• If the LED light is green, the P-660HWP-Dx detects other HomePlug AV devices and you 

are ready to set up your network.

You need to configure the power line settings of the P-660HWP-Dx, as well as the power 
line settings of the other devices you wish to add to your network. 

3 Go to Network > Powerline > Local Setting to configure the P-660HWP-Dx’s power 

line settings. 

• Select Enable Powerline.