ZyXEL p-660hwp Guia Do Utilizador

 Chapter 14 Static Route

P-660HWP-Dx User’s Guide

Figure 128   Static Route Edit

The following table describes the labels in this screen. 

Table 84   Static Route Edit

Active

This field allows you to activate/deactivate this static route.

Route Name

Enter the name of the IP static route. Leave this field blank to delete this static 

route.

Destination IP 

Address

This parameter specifies the IP network address of the final destination.  Routing is 

always based on network number. If you need to specify a route to a single host, 

use a subnet mask of 255.255.255.255 in the subnet mask field to force the network 

number to be identical to the host ID.

IP Subnet Mask  Enter the IP subnet mask here.

Gateway IP 

Address

Enter the IP address of the gateway. The gateway is a router or switch on the same 

network segment as the device's LAN or WAN port. The gateway helps forward 

packets to their destinations.

Back

Click Back to return to the previous screen without saving.

Apply

Click Apply to save your changes to the P-660HWP-Dx.

Cancel

Click Cancel to begin configuring this screen afresh.