ZyXEL p-660hwp Guia Do Utilizador

 Chapter 17 Remote Management Configuration

P-660HWP-Dx User’s Guide

The following table describes the labels in this screen.

You can configure your P-660HWP-Dx for remote Telnet access as shown next. The 
administrator uses Telnet from a computer on a remote network to access the P-660HWP-Dx.

Figure 137   Telnet Configuration on a TCP/IP Network

Table 98   Remote Management: WWW

Port

You may change the server port number for a service if needed, however you must 

use the same port number in order to use that service for remote management.

Access Status

Select the interface(s) through which a computer may access the P-660HWP-Dx 

using this service.

Secured Client IP A secured client is a “trusted” computer that is allowed to communicate with the P-

660HWP-Dx using this service. 
Select All to allow any computer to access the P-660HWP-Dx using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the P-660HWP-Dx using this service.

HTTPS

Server Host Key

Select the Server Certificate that the P-660HWP-Dx will use to identify itself. The 

P-660HWP-Dx is the SSL server and must always authenticate itself to the SSL 

client (the computer which requests the HTTPS connection with the P-660HWP-

Dx).

Authenticate 

Client Certificates

Select Authenticate Client Certificates (optional) to require the SSL client to 

authenticate itself to the P-660HWP-Dx by sending the P-660HWP-Dx a certificate. 

To do that the SSL client must have a CA-signed certificate from a CA that has 

been imported as a trusted CA on the P-660HWP-Dx.

Port

You may change the server port number for a service if needed, however you must 

use the same port number in order to use that service for remote management.

Access Status

Select the interface(s) through which a computer may access the P-660HWP-Dx 

using this service.

Secured Client IP A secured client is a “trusted” computer that is allowed to communicate with the P-

660HWP-Dx using this service. 
Select All to allow any computer to access the P-660HWP-Dx using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the P-660HWP-Dx using this service.

Apply

Click Apply to save your settings to the P-660HWP-Dx. 

Cancel

Click Cancel to begin configuring this screen afresh.