ZyXEL p-660hwp Guia Do Utilizador

Chapter 20 Logs

P-660HWP-Dx User’s Guide

Figure 162   View Log

The following table describes the fields in this screen.  

Use the Log Settings screen to configure to where the P-660HWP-Dx is to send logs; the 
schedule for when the P-660HWP-Dx is to send the logs and which logs and/or immediate 
alerts the P-660HWP-Dx is to record. See 

To change your P-660HWP-Dx’s log settings, click Maintenance > Logs > Log Settings. 
The screen appears as shown.
Alerts are e-mailed as soon as they happen. Logs may be e-mailed as soon as the log is full. 
Selecting many alert and/or log categories (especially Access Control) may result in many e-
mails being sent.

Table 109   View Log

Display 

The categories that you select in the Log Settings screen display in the drop-down 

list box.
Select a category of logs to view; select All Logs to view logs from all of the log 

categories that you selected in the Log Settings page. 

Email Log Now 

Click Email Log Now to send the log screen to the e-mail address specified in the 

Log Settings page (make sure that you have first filled in the E-mail Log Settings 

fields in Log Settings).

Refresh

Click Refresh to renew the log screen. 

Clear Log 

Click Clear Log to delete all the logs. 

#

This field indicates the log number.

Time 

This field displays the time the log was recorded. 

Message

This field states the reason for the log.

Source

This field lists the source IP address and the port number of the incoming packet.

Destination 

This field lists the destination IP address and the port number of the incoming 

packet.

Notes

This field displays additional information about the log entry.