ZyXEL p-660hwp Guia Do Utilizador

 Chapter 2 Introducing the Web Configurator

P-660HWP-Dx User’s Guide

Click the Any IP Table hyperlink in the Status screen. The Any IP table shows current read-
only information (including the IP address and the MAC address) of all network devices that 
use the Any IP feature to communicate with the P-660HWP-Dx.

Figure 14   Status: Any IP Table

CPU Usage

This number shows how many kilobytes of the heap memory the P-660HWP-Dx is 

using. Heap memory refers to the memory that is not used by ZyNOS (ZyXEL 

Network Operating System) and is thus available for running processes like NAT, 

VPN and the firewall.
The bar displays what percent of the P-660HWP-Dx's heap memory is in use. The 

bar turns from green to red when the maximum is being approached.

Memory Usage

This number shows the P-660HWP-Dx's total heap memory (in kilobytes). 
The bar displays what percent of the P-660HWP-Dx's heap memory is in use. The 

bar turns from green to red when the maximum is being approached.

Interface Status

Interface

This displays the P-660HWP-Dx port types. 

Status

This field displays Down (line is down), Up (line is up or connected) if you're using 

Ethernet encapsulation and Down (line is down), Up (line is up or connected), Idle 

(line (ppp) idle), Dial (starting to trigger a call) and Drop (dropping a call) if you're 

using PPPoE encapsulation.

Rate

For the LAN ports, this displays the port speed and duplex setting. 
Ethernet port connections can be in half-duplex or full-duplex mode. Full-duplex 

refers to a device's ability to send and receive simultaneously, while half-duplex 

indicates that traffic can flow in only one direction at a time. The Ethernet port 

must use the same speed or duplex mode setting as the peer Ethernet port in 

order to connect.
For the WAN port, it displays the downstream and upstream transmission rate.

Summary

Any IP Table

Use this screen to view a list of IP addresses and MAC addresses of computers, 

which are not in the same subnet as the P-660HWP-Dx.

WLAN Status 

(Wireless devices 

only)

This screen displays the MAC address(es) of the wireless stations that are 

currently associating with the P-660HWP-Dx. 

Bandwidth Status

Use this screen to view the P-660HWP-Dx’s bandwidth usage and allotments.

Packet Statistics

Use this screen to view port status and packet specific statistics.

Powerline Status

This screen indicates the status of your Powerline network connection.

Table 4   Status Screen (continued)