ZyXEL p-660hwp Guia Do Utilizador

 Chapter 3 Wizard Setup for Internet/Wireless Access

P-660HWP-Dx User’s Guide

Figure 34   Wireless LAN Setup Wizard 2

The following table describes the labels in this screen.

Table 14   Wireless LAN Setup Wizard 2

Network Name 

(SSID)

Enter a descriptive name (up to 32 printable 7-bit English keyboard characters) for the 

wireless LAN. 
If you change this field on the P-660HWP-Dx, make sure all wireless stations use the 

same SSID in order to access the network. 

Channel 

Selection

The range of radio frequencies used by IEEE 802.11b/g wireless devices is called a 

channel. Select a channel ID that is not already in use by a neighboring device.

Security

Select Automatically assign a WPA key (Recommended) to have the P-660HWP-

Dx create a pre-shared key (WPA-PSK) automatically only if your wireless clients 

support WPA and OTIST. This option is available only when you enable OTIST in the 

previous wizard screen.
Select Manually assign a WPA-PSK key to configure a pre-shared key (WPA-PSK). 

Choose this option only if your wireless clients support WPA. See 

 for more information.

Select Manually assign a WEP key to configure a WEP Key. See 

 for more information.

Select Disable wireless security to have no wireless LAN security configured and 

your network is accessible to any wireless networking device that is within range.

Note: If you enable OTIST in the previous wizard screen but select 

Disable wireless security here, the P-660HWP-Dx still creates 
a pre-shared key (WPA-PSK) automatically.

If you enable OTIST and select Manually assign a WEP key, 
the P-660HWP-Dx will replace the WEP key with a WPA-PSK.

Back

Click Back to display the previous screen.

Next

Click Next to proceed to the next screen. 

Exit

Click Exit to close the wizard screen without saving.