ZyXEL p-660hwp Guia Do Utilizador

Chapter 5 WAN Setup

P-660HWP-Dx User’s Guide

To edit your P-660HWP-Dx's advanced WAN settings, click the Advanced Setup button in 
the Internet Connection screen. The screen appears as shown.

VPI

The valid range for the VPI is 0 to 255. Enter the VPI assigned to you.

VCI

The valid range for the VCI is 32 to 65535 (0 to 31 is reserved for local 

management of ATM traffic). Enter the VCI assigned to you.

IP Address

This option is available if you select Routing in the Mode field.

Obtain an IP 

Address 

Automatically

Select this if you get a dynamic IP address from your Internet Service Provider 

(ISP). A dynamic IP address is not fixed; your ISP assigns you a different one 

each time you connect to the Internet. 
This option is not available if you select RFC 1483 in the Encapsulation field.

Static IP Address

Select this if your ISP gave you a fixed IP address. Enter the IP address you 

were given in the IP Address field.

IP Address

If your ISP gave you an IP address to use, enter it here.

Subnet Mask 
(ENET ENCAP 

encapsulation only)

Enter a subnet mask in dotted decimal notation. 
Refer to the appendices to calculate a subnet mask If you are implementing 

subnetting.

Gateway IP address
(ENET ENCAP 

encapsulation only)

You must specify a gateway IP address (supplied by your ISP) when you select 

ENET ENCAP in the Encapsulation field

Connection 
(PPPoA and PPPoE 

encapsulation only)

Nailed-Up 

Connection

Select Nailed-Up Connection when you want your connection up all the time. 

The P-660HWP-Dx will try to bring up the connection automatically if it is 

disconnected.

Connect on 

Demand

Select Connect on Demand when you don't want the connection up all the time 

and specify an idle time-out in the Max Idle Timeout field.

Max Idle Timeout

Specify an idle time-out in the Max Idle Timeout field when you select Connect 

on Demand. The default setting is 0, which means the Internet session will not 

timeout.

Apply

Click Apply to save the changes. 

Cancel

Click Cancel to begin configuring this screen afresh.

Advanced Setup

Click this button to display the Advanced Internet Connection Setup screen 

and edit more details of your WAN setup.

Table 20   Internet Connection (continued)