ZyXEL p-660hwp Manual Do Utilizador

 Chapter 7 Wireless LAN

P-660HWP-Dx User’s Guide

In a wireless network, the wireless clients must have the same SSID and security settings as 
the access point (AP) or wireless router (we will refer to both as “AP” here) in order to 
associate with it. Traditionally this meant that you had to configure the settings on the AP and 
then manually configure the exact same settings on each wireless client.
OTIST (One-Touch Intelligent Security Technology) allows you to transfer your AP’s SSID 
and WPA-PSK security settings to wireless clients that support OTIST and are within 
transmission range. You can also choose to have OTIST generate a WPA-PSK key for you if 
you didn’t configure one manually.

"

You must enable OTIST on both the AP and wireless client before you start transferring 
settings.

"

You can enable OTIST using the RESET button or the web configurator. 

If you use the RESET button, the default (01234567) or previous saved (through the web 
configurator) Setup key is used to encrypt the settings that you want to transfer. 
Hold in the RESET button for three to eight seconds. 

Max. Frame 

Burst

Enable Maximum Frame Burst to help eliminate collisions in mixed-mode 

networks (networks with both IEEE 802.11g and IEEE 802.11b traffic) and enhance 

the performance of both pure IEEE 802.11g and mixed IEEE 802.11b/g networks. 

Maximum Frame Burst sets the maximum time, in micro-seconds, that the ZP-

660HWP-Dx transmits IEEE 802.11g wireless traffic only. 
Type the maximum frame burst between 0 and 1800 (650, 1000 or 1800 

recommended). Enter 0 to disable this feature.

Back

Click Back to return to the previous screen.

Apply

Click Apply to save your changes to the P-660HWP-Dx.

Cancel

Click Cancel to reload the previous configuration for this screen.

Table 37   Wireless LAN: Advanced (continued)