ZyXEL p-660hwp Manual Do Utilizador

 Chapter 15 Bandwidth Management

P-660HWP-Dx User’s Guide

You must use the Bandwidth Management Summary screen to enable bandwidth 
management on an interface before you can configure rules for that interface.
Click Advanced > Bandwidth MGMT > Rule Setup to open the following screen.

Figure 131   Bandwidth Management: Rule Setup

The following table describes the labels in this screen.  

Scheduler

Select either Priority-Based or Fairness-Based from the drop-down menu to control 

the traffic flow. 
Select Priority-Based to give preference to bandwidth classes with higher priorities. 
Select Fairness-Based to treat all bandwidth classes equally.

Max 

Bandwidth 

Usage

Select this check box to have the P-660HWP-Dx divide up all of the interface’s 

unallocated and/or unused bandwidth among the bandwidth classes that require 

bandwidth. Do not select this if you want to reserve bandwidth for traffic that does not 

match a bandwidth class or you want to limit the speed of this interface (see the Speed 

field description).

Apply

Click Apply to save your settings to the P-660HWP-Dx.

Cancel

Click Cancel to begin configuring this screen afresh.

Table 91   Media Bandwidth Management: Summary (continued)

Table 92   Bandwidth Management: Rule Setup

Direction 

Select the direction of traffic to which you want to apply bandwidth management.

Service 

Select a service for your rule or you can select User Defined to go to the screen 

where you can define your own.

Priority

Select a priority from the drop down list box. Choose High, Mid or Low.

Bandwidth (kbps)

Specify the maximum bandwidth allowed for the rule in kbps. The 

recommendation is a setting between 20 kbps and 20000 kbps for an individual 

rule. 

Add

Click this button to add a rule to the following table.