ZyXEL p-660hwp Manual Do Utilizador
Chapter 21 Tools
P-660HWP-Dx User’s Guide
39
Figure 171 Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default P-660HWP-Dx IP address
(192.168.1.1). See the appendix for details on how to set up your computer’s IP address.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.
computer to be in the same subnet as that of the default P-660HWP-Dx IP address
(192.168.1.1). See the appendix for details on how to set up your computer’s IP address.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.
Figure 172 Configuration Restore Error
21.2.3 Back to Factory Defaults
Pressing the RESET button in this section clears all user-entered configuration information
and returns the P-660HWP-Dx to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory defaults of your P-
660HWP-Dx. Refer to the chapter about introducing the web configurator for more
information on the RESET button.
and returns the P-660HWP-Dx to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory defaults of your P-
660HWP-Dx. Refer to the chapter about introducing the web configurator for more
information on the RESET button.
21.3 Restart
System restart allows you to reboot the P-660HWP-Dx without turning the power off.
Click Maintenance > Tools > Restart. Click Restart to have the P-660HWP-Dx reboot. This
does not affect the P-660HWP-Dx's configuration.
Click Maintenance > Tools > Restart. Click Restart to have the P-660HWP-Dx reboot. This
does not affect the P-660HWP-Dx's configuration.
Figure 173 Restart Screen