ZyXEL p-660hwp Manual Do Utilizador

Appendix G Firewall Commands

P-660HWP-Dx User’s Guide

Edit

E-mail 

config edit firewall e-mail 
mail-server <ip address of 
mail server>

This command sets the IP address to which 

the e-mail messages are sent.

config edit firewall e-mail 
return-addr <e-mail address>

This command sets the source e-mail 

address of the firewall e-mails.

config edit firewall e-mail 
email-to <e-mail address>

This command sets the e-mail address to 

which the firewall e-mails are sent.

config edit firewall e-mail 
policy <full | hourly | daily 
| weekly>

This command sets how frequently the 

firewall log is sent via e-mail. 

config edit firewall e-mail 
day <sunday | monday | tuesday 
| wednesday | thursday | 
friday | saturday>

This command sets the day on which the 

current firewall log is sent through e-mail if the 

P-660HWP-Dx is set to send it on a weekly 

basis.

config edit firewall e-mail 
hour <0-23>

This command sets the hour when the firewall 

log is sent through e- mail if the P-660HWP-

Dx is set to send it on an hourly, daily or 

weekly basis.

config edit firewall e-mail 
minute <0-59>

This command sets the minute of the hour for 

the firewall log to be sent via e- mail if the P-

660HWP-Dx is set to send it on a hourly, daily 

or weekly basis.

Attack 

config edit firewall attack 
send-alert <yes | no>

This command enables or disables the 

immediate sending of DOS attack notification 

e-mail messages.

config edit firewall attack 
block <yes | no>

Set this command to yes to block new traffic 

after the tcp-max-incomplete threshold is 

exceeded. Set it to no to delete the oldest 

half-open session when traffic exceeds the 

tcp-max-incomplete threshold.

config edit firewall attack 
block-minute <0-255>

This command sets the number of minutes for 

new sessions to be blocked when the tcp-

max-incomplete threshold is reached. This 

command is only valid when block is set to 

yes.

Table 168   Firewall Commands (continued)