ZyXEL p-320w Guia Do Utilizador
P-320W User’s Guide
52
Chapter 3 Connection Wizard
The following table describes the labels in this screen.
Table 12 OTIST
LABEL
DESCRIPTION
Do you want to
enable OTIST?
Select the Yes radio button and click Next to proceed with the setup wizard and
enable OTIST only when you click Finish in the final wizard screen.
Click No and then Next to proceed to the following screen.
Click No and then Next to proceed to the following screen.
Setup Key
The default OTIST Setup Key is “01234567”. This key can be changed in the
web configurator. Be sure to use the same OTIST Setup Key on the Prestige
and wireless clients.
Back
Click Back to display the previous screen.
Next
Click Next to proceed to the next screen.
Exit
Click Exit to close the wizard screen without saving.
Refer to the chapter on wireless LAN for more information.
3.4 Connection Wizard: STEP 3: Internet Configuration
The Prestige offers three Internet connection types. They are Ethernet, PPP over Ethernet or
PPTP. The wizard attempts to detect which WAN connection type you are using. If the wizard
does not detect a connection type, you must select one from the drop-down list box. Check
with your ISP to make sure you use the correct type.
PPTP. The wizard attempts to detect which WAN connection type you are using. If the wizard
does not detect a connection type, you must select one from the drop-down list box. Check
with your ISP to make sure you use the correct type.
Figure 19 Connection Wizard: STEP 3: WAN Connection Type.