ZyXEL p-662h-61 Guia Do Utilizador
Prestige 662HW Series User’s Guide
Chapter 19 VPN Screens
220
You can also enter a remote secure gateway’s domain name in the Secure Gateway Address
field if the remote secure gateway has a dynamic WAN IP address and is using DDNS. The
Prestige has to rebuild the VPN tunnel each time the remote secure gateway’s WAN IP address
changes (there may be a delay until the DDNS servers are updated with the remote gateway’s
new WAN IP address).
field if the remote secure gateway has a dynamic WAN IP address and is using DDNS. The
Prestige has to rebuild the VPN tunnel each time the remote secure gateway’s WAN IP address
changes (there may be a delay until the DDNS servers are updated with the remote gateway’s
new WAN IP address).
19.4.1 Dynamic Secure Gateway Address
If the remote secure gateway has a dynamic WAN IP address and does not use DDNS, enter
0.0.0.0 as the secure gateway’s address. In this case only the remote secure gateway can
initiate SAs. This may be useful for telecommuters initiating a VPN tunnel to the company
network (see
0.0.0.0 as the secure gateway’s address. In this case only the remote secure gateway can
initiate SAs. This may be useful for telecommuters initiating a VPN tunnel to the company
network (see
The Secure Gateway IP Address may be configured as 0.0.0.0 only when using IKE key
management and not Manual key management.
management and not Manual key management.
19.5 VPN Summary Screen
The following figure helps explain the main fields in the web configurator.
Figure 93 IPSec Summary Fields
Local and remote IP addresses must be static.
Click VPN and Setup to open the VPN Summary screen. This is a read-only menu of your
IPSec rules (tunnels). The IPSec summary menu is read-only. Edit a VPN by selecting an
index number and then configuring its associated submenus.
IPSec rules (tunnels). The IPSec summary menu is read-only. Edit a VPN by selecting an
index number and then configuring its associated submenus.