ZyXEL p-662h-61 Guia Do Utilizador

Prestige 662HW Series User’s Guide

Chapter 27 Menu 2 WAN Backup Setup

308

1 From the main menu, enter 2 to open menu 2. Then move the cursor to the Dial Backup 

field in 

2 Menu 2 - WAN Backup Setup, press the [SPACE BAR] to select Yes and then press 

[ENTER].

Figure 153   Menu 2.2 Dial Backup Setup 

The following table describes the fields in this menu.

Metric

This field sets this route's priority among the routes the Prestige uses. 

The metric represents the "cost of transmission". A router determines the best route 
for transmission by choosing a path with the lowest "cost". RIP routing uses hop 
count as the measurement of cost, with a minimum of "1" for directly connected 
networks. The number must be between "1" and "15"; a number greater than "15" 
means the link is down. The smaller the number, the lower the "cost"

When you have completed this menu, press [ENTER] at the prompt “

Press ENTER to Confirm 

or ESC to Cancel:

”  to save your configuration, or press [ESC] at any time to cancel.

Table 105   Menu 2.1Traffic Redirect Setup

Menu 2.2 - Dial Backup Setup

              Dial-Backup:

                Active= No

                Port Speed= 115200

              AT Command String:

                Init= at&fs0=0

                Edit Advanced Setup= No

Press ENTER to Confirm or ESC to Cancel:

Table 106   Menu 2.2 Dial Backup Setup

Dial-Backup:

Active

Use this field to turn the dial-backup feature on (Yes) or off (No).

Port Speed

Press [SPACE BAR] and then press [ENTER] to select the speed of the connection 
between the Dial Backup port and the external device.

Available speeds are:9600, 19200, 38400, 57600, 115200 or 230400 bps.

AT Command 
String:

Init

Enter the AT command string to initialize the WAN device. Consult the manual of your 
WAN device connected to your Dial Backup port for specific AT commands.