ZyXEL p-662h-61 Guia Do Utilizador

Prestige 662HW Series User’s Guide

Chapter 37 SNMP Configuration

378

Figure 221   Menu 22 SNMP Configuration

The following table describes the SNMP configuration parameters.

The Prestige will send traps to the SNMP manager when any one of the following events 
occurs:

Menu 22 - SNMP Configuration

SNMP:

  Get Community= public

  Set Community= public

  Trusted Host= 0.0.0.0

  Trap:

    Community= public

    Destination= 0.0.0.0

Press ENTER to Confirm or ESC to Cancel:

Table 130   Menu 22 SNMP Configuration

SNMP:

Get Community

Type the Get Community, which is the password for the incoming Get- and 
GetNext requests from the management station.

Set Community

Type the Set community, which is the password for incoming Set requests from 
the management station. 

Trusted Host

If you enter a trusted host, your Prestige will only respond to SNMP messages 
from this address. A blank (default) field means your Prestige will respond to all 
SNMP messages it receives, regardless of source.

Trap:

Community

Type the trap community, which is the password sent with each trap to the SNMP 
manager. 

Destination

Type the IP address of the station to send your SNMP traps to.

When you have completed this menu, press [ENTER] at the prompt “

Press ENTER to Confirm 

or ESC to Cancel:

”  to save your configuration, or press [ESC] at any time to cancel.

Table 131   SNMP Traps

1

coldStart (defined in RFC-1215)

A trap is sent after booting (power on).

2

warmStart (defined in RFC-1215)

A trap is sent after booting (software reboot).

3

linkDown (defined in RFC-1215)

A trap is sent with the port number when any of the 
links are down. See the following table.

4

linkUp (defined in RFC-1215)

A trap is sent with the port number.