ZyXEL p-662h-61 Guia Do Utilizador

Prestige 662HW Series User’s Guide

399

Chapter 40 Firmware and Configuration File Maintenance

Figure 240   FTP Session Example

The following table describes some of the commands that you may see in GUI-based FTP 
clients.

TFTP, FTP and Telnet over WAN will not work when:

• You have disabled Telnet service in menu 24.11.

• You have applied a filter in menu 3.1 (LAN) or in menu 11.5 (WAN) to block Telnet 

service.

• The IP address in the Secured Client IP field in menu 24.11 does not match the client IP. 

If it does not match, the Prestige will disconnect the Telnet session immediately.

• You have an SMT console session running.

331 Enter PASS command

Password:

230 Logged in

ftp> bin

200 Type I OK

ftp> get rom-0 zyxel.rom

200 Port command okay

150 Opening data connection for STOR ras

226 File received OK

ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec.

ftp> quit

Table 141   General Commands for GUI-based FTP Clients

Host Address

Enter the address of the host server.

Login Type

Anonymous.

This is when a user I.D. and password is automatically supplied to the 
server for anonymous access.  Anonymous logins will work only if your ISP 
or service administrator has enabled this option.

Normal.  

The server requires a unique User ID and Password to login.

Transfer Type

Transfer files in either ASCII (plain text format) or in binary mode.

Initial Remote Directory

Specify the default remote directory (path).

Initial Local Directory

Specify the default local directory (path).