ZyXEL p-662h-61 Guia Do Utilizador

Prestige 662HW Series User’s Guide

Chapter 43 IP Policy Routing

426

This section shows you where to apply the IP policies after you design them.

From Menu 3 — Ethernet Setup, type 2 to go to Menu 3.2 — TCP/IP and DHCP Ethernet 
Setup.

You can choose up to four IP policy sets (from 12) by typing their numbers separated by 
commas, for example, 2, 4, 7, 9.

Gateway addr

Defines the outgoing gateway address. The gateway must be on the same 
subnet as the Prestige if it is on the LAN, otherwise, the gateway must be the IP 
address of a remote node. The default gateway is specified as 0.0.0.0.

Type of Service

Set the new TOS value of the outgoing packet. Prioritize incoming network traffic 
by choosing No Change, Normal, Min Delay, Max Thruput, Max Reliable or 
Min Cost.

Precedence

Set the new outgoing packet precedence value. Values are 0 to 7 or No 
Change.

Log

Press [SPACE BAR] and then [ENTER] to select Yes to make an entry in the 
system log when a policy is executed.

When you have completed this menu, press [ENTER] at the prompt “

Press ENTER to Confirm 

or ESC to Cancel:

”  to save your configuration, or press [ESC] at any time to cancel.

Table 147   Menu 25.1.1 IP Routing Policy (continued)