ZyXEL 793H Guia De Configuração Rápida

P-793H Quick Start Guide

3

• The POWER LED blinks green while your P-793H starts up and stays on when it is ready.
• The DSL1 and DSL2 LEDs blink while the P-793H is trying to establish a connection with 

the ISP and stay on when the connection is established.

• Each LAN LED stays on if the corresponding ETHERNET port is properly connected and 

blinks when there is traffic.

V

If any of these LEDs are off, check your connections, and inspect your 
cables for damage. If the LEDs are still off, contact your local vendor.

Use the Status screen to view basic setup information.

1 Open your Internet browser, and enter 

http://192.168.1.1

.

V

If you cannot access the web configurator, make sure you allow pop-up 
windows and JavaScripts and set up Java permissions appropriately. See 
the User’s Guide for more information and further troubleshooting tips.

V

Make sure your computer’s IP address is in the same subnet as the P-
793H’s LAN IP address.

2 Enter the password user to go directly 

to the Status screen.