ZyXEL G-2000 Manual Do Utilizador
ZyXEL G-2000 Plus v2 Quick Start Guide
3
3 RESET: You only need to use this button if you've forgotten the ZyXEL device's password. It returns the
ZyXEL device to the factory defaults (password is 1234 and LAN IP address 192.168.1.1). Refer to the
User's Guide for more information.
User's Guide for more information.
4 POWER: Use the included power adaptor to connect the POWER socket to an appropriate power source.
After you’ve made the connections look at the front panel lights. .
• The PWR light turns steady on when the power adaptor is connected.
• The SYS light blinks while performing system testing and then turns
• The SYS light blinks while performing system testing and then turns
steady on if the testing is successful.
• The ZyAIR (breathing) light turns steady on while the wireless card on
the ZyXEL device is working.
• The LAN and WAN lights turn on, if the corresponding ports are prop-
erly connectedIf the lights are not on, check your connections and
inspect your cables for damage. If you still have problems, contact
your local vendor.
inspect your cables for damage. If you still have problems, contact
your local vendor.