ZyXEL g-2000 plusv2 Guia Do Utilizador

ZyXEL G-2000 Plus v2 User’s Guide

Chapter 7 WAN

103

Figure 34   Ethernet Encapsulation

The following table describes the labels in this screen.

The ZyXEL device supports PPPoE (Point-to-Point Protocol over Ethernet). PPPoE is an 
IETF Draft standard (RFC 2516) specifying how a personal computer (PC) interacts with a 
broadband modem (DSL, cable, wireless, etc.) connection. The PPP over Ethernet option is 
for a dial-up connection using PPPoE.

Table 34   Ethernet Encapsulation

Encapsulation

You must choose the Ethernet option when the WAN port is used as a regular 

Ethernet.

Service Type

Choose from Standard, RR-Toshiba (Roadrunner Toshiba authentication 

method), RR-Manager (Roadrunner Manager authentication method), RR-Telstra 

(RoadRunner Telstra authentication method), or Telia Login.
The following fields do not appear with the Standard service type.

User Name

Type the user name given to you by your ISP.

Password

Type the password associated with the user name above.

Retype to Confirm

Type the password again to make sure that you have entered it correctly.

Login Server IP 

Address

Type the authentication server IP address here if your ISP gave you one.

Login Server 

This field only applies when you select Telia Login in the Service Type. Type the 

domain name of the Telia login server, for example “login1.telia.com”.

Relogin Every(min) This field only applies when you select Telia Login in the Service Type. The Telia 

server logs the ZyXEL device out if the ZyXEL device does not log in periodically. 

Type the number of minutes from 1 to 59 for the ZyXEL device to wait between 

logins.

Apply

Click Apply to save your changes back to the ZyXEL device.

Reset

Click Reset to begin configuring this screen afresh.