ZyXEL g-2000 plusv2 Guia Do Utilizador

ZyXEL G-2000 Plus v2 User’s Guide

Chapter 9 Static Route Screens

131

Select a static route index number and click Edit. The screen shown next appears. Fill in the 
required information for each static route.

Figure 49   Static Route: Edit

The following table describes the labels in this screen. 

Table 45   Static Route

#

Number of an individual static route.

Name

Name that describes or identifies this route. 

Active

This field shows whether this static route is active (Yes) or not (No).

Destination

This parameter specifies the IP network address of the final destination. Routing is 

always based on network number. 

Gateway

This is the IP address of the gateway. The gateway is an immediate neighbor of 

your ZyXEL device that will forward the packet to the destination. On the LAN, the 

gateway must be a router on the same segment as your ZyXEL device; over the 

WAN, the gateway must be the IP address of one of the remote nodes.

Edit

Select a static route index number and then click Edit to set up a static route on the 

ZyXEL device.

Delete

To remove a static route on the ZyXEL device, click the radio button next to the 

static route index number you want to remove, then click Delete.