ZyXEL g-2000 plusv2 Guia Do Utilizador
ZyXEL G-2000 Plus v2 User’s Guide
134
Chapter 10 Firewalls
1 Information hiding prevents the names of internal systems from being made known via
DNS to outside systems, since the application gateway is the only host whose name must
be made known to outside systems.
be made known to outside systems.
2 Robust authentication and logging pre-authenticates application traffic before it reaches
internal hosts and causes it to be logged more effectively than if it were logged with
standard host logging. Filtering rules at the packet filtering router can be less complex
than they would be if the router needed to filter application traffic and direct it to a
number of specific systems. The router need only allow application traffic destined for
the application gateway and reject the rest.
standard host logging. Filtering rules at the packet filtering router can be less complex
than they would be if the router needed to filter application traffic and direct it to a
number of specific systems. The router need only allow application traffic destined for
the application gateway and reject the rest.
10.2.3 Stateful Inspection Firewalls
Stateful inspection firewalls restrict access by screening data packets against defined access
rules. They make access control decisions based on IP address and protocol. They also
"inspect" the session data to assure the integrity of the connection and to adapt to dynamic
protocols. These firewalls generally provide the best speed and transparency; however, they
may lack the granular application level access control or caching that some proxies support.
See “Stateful Inspection” on page 140 for more information on Stateful Inspection.
rules. They make access control decisions based on IP address and protocol. They also
"inspect" the session data to assure the integrity of the connection and to adapt to dynamic
protocols. These firewalls generally provide the best speed and transparency; however, they
may lack the granular application level access control or caching that some proxies support.
See “Stateful Inspection” on page 140 for more information on Stateful Inspection.
Firewalls, of one type or another, have become an integral part of standard security solutions
for enterprises.
for enterprises.
10.3 Introduction to ZyXEL’s Firewall
The ZyXEL device firewall is a stateful inspection firewall and is designed to protect against
Denial of Service attacks when activated (in SMT menu 21.2 or in the web configurator). The
ZyXEL device’s purpose is to allow a private Local Area Network (LAN) to be securely
connected to the Internet. The ZyXEL device can be used to prevent theft, destruction and
modification of data, as well as log events, which may be important to the security of your
network. The ZyXEL device also has packet-filtering capabilities.
Denial of Service attacks when activated (in SMT menu 21.2 or in the web configurator). The
ZyXEL device’s purpose is to allow a private Local Area Network (LAN) to be securely
connected to the Internet. The ZyXEL device can be used to prevent theft, destruction and
modification of data, as well as log events, which may be important to the security of your
network. The ZyXEL device also has packet-filtering capabilities.
The ZyXEL device is installed between the LAN and a broadband modem connecting to the
Internet. This allows it to act as a secure gateway for all data passing between the Internet and
the LAN.
Internet. This allows it to act as a secure gateway for all data passing between the Internet and
the LAN.
The ZyXEL device has one Ethernet WAN port and one Ethernet LAN port, which are used to
physically separate the network into two areas.
physically separate the network into two areas.
• The WAN (Wide Area Network) port attaches to the broadband modem (cable or ADSL)
connecting to the Internet.
• The LAN (Local Area Network) port attaches to a network of computers, which needs
security from the outside world. These computers will have access to Internet services
such as e-mail, FTP, and the World Wide Web. However, inbound access will not be
allowed unless the remote host is authorized to use a specific service.
such as e-mail, FTP, and the World Wide Web. However, inbound access will not be
allowed unless the remote host is authorized to use a specific service.